Jaw Crusher
The Jaw Crusher is mainly used to crush kinds of mining stones primarily, and the largest compression resistance of the material is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.
Jaw Crusher features:
1.High ratio of crushing,
2.Even final size,
3.Simple structure,
4.Reliable working condition,
5.Easy maintenance,
6.Low operating cost.
Working Principle of Jaw Crusher:
The motor transmits power through belt, drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and moving jaw plate increases when moving jaw moves . So the moving jaw moves towards the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.
Jaw Crusher Technical Data:
| Models |
Size of feed opening
(mm) |
Max
feed
size
(mm) |
Adjustable range of discharge opening
(mm) |
capacity
(m3/h) |
Power
(kw) |
Weight
(t) |
| PE-150x250 |
150x250 |
125 |
10-40 |
0.6-3 |
5.5 |
0.81 |
| PE-250x400 |
250x400 |
210 |
20-60 |
3-13 |
15 |
2.8 |
| PE-400x600 |
400x600 |
340 |
40-100 |
10-34 |
37 |
6.5 |
| PE-500x750 |
500x750 |
425 |
50-100 |
20-52 |
55 |
10.3 |
| PE-600x900 |
600x900 |
500 |
65-160 |
30-75 |
75 |
15.5 |
| PE-750x1060 |
750x1060 |
630 |
80-140 |
72-130 |
90 |
28 |
| PE-900x1200 |
900x1200 |
750 |
95-165 |
87-164 |
160 |
50 |
| PE-1000x1200 |
1000x1200 |
850 |
195-265 |
197-214 |
160 |
51 |
| PE-1200x1500 |
1200x1500 |
1020 |
150-300 |
400-800 |
200 |
100.9 |
| PEX-150x750 |
150x750 |
120 |
18-48 |
5-16 |
15 |
3.5 |
| PEX-250x750 |
250x750 |
210 |
25-60 |
8-22 |
30 |
4.9 |
| PEX-250*1000 |
250x1000 |
210 |
25-60 |
10-32 |
37 |
6.5 |
| PEX-250x1200 |
250x1200 |
210 |
25-60 |
13-38 |
45 |
7.7 |
| PEX-300x1300 |
300x1300 |
250 |
20-90 |
10-65 |
75 |
11 |
